Here is a picture of one of the modules and you can
see the edge connector pretty well.
I am trying to see if this guy says what the
"pitch" of the connectors is anywhere...or even maybe a supplier.
----- Original Message -----From: grantbt@...Sent: Monday, June 05, 2006 3:48 PMSubject: Re: [vintagesynthrepair] edge card connectors supplier?It might be S-100 (or S100) bus. I'm not familiar with your device,but S-100 was kind of like ISA and is still pretty available (I think).GB-----Original Message-----
From: Brendan Haley
Sent: Jun 5, 2006 12:41 PM
To: vintagesynthrepair@yahoogroups.com
Subject: Re: [vintagesynthrepair] edge card connectors supplier?
Is the spacing measured from the edge of one contact to the edge of the next? Or is it from the center of each contact? I don't have them with me here at work, but you can all be assured of the fact that I WILL be measuring these when I get home :)I found these people, who look promising----- Original Message -----From: Antoine DeschênesSent: Monday, June 05, 2006 3:33 PMSubject: Re: [vintagesynthrepair] edge card connectors supplier?Just searched a bit, here's what I found.
These are card-edge connectors. If the spacing is like an ISA card, it's
0.1" or 2.54mm. There are some at Mouser. The only thing is that they're
almost all to mount on ribbon cables.
BRENDAN HALEY a écrit :
> OK, I realize it is not a "synth" per se, but we have some old
> Ward Beck console modules we want to mount up and use, but
> they have big giant old school edge card connectors. My
> question is, does anyone here know of a supplier for larger
> size edge card connector sockets....I think you guys should
> know what I am talking about (i.e. more like an ISA card than
> a PCI card....)
>
> I know I needed one for my mellotron a while back and was
> having trouble finding them....and ended up just getting one
> from Streetly.
>
> Also, what is the correct terminology for edge card sizes
> besides pin number? Like is there some parameter that
> describes the "size" of the card or the pins....like is the
> bigger edge card connector like an "eighth inch pin" or
> something like that? Or in other words what am I "searching" for?
>
> Much appreciated,
>
> -brendan
SPONSORED LINKSElectric piano Electronic repair Sampler Moog synthesizer Electro mechanical Electronic repair part
YAHOO! GROUPS LINKS
- Visit your group "vintagesynthrepair" on the web.
- To unsubscribe from this group, send an email to:
vintagesynthrepair-unsubscribe@yahoogroups.com
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.