Vintage Synth Repair

Cyrille,

You should check out the ARP Odyssey resourse page:

http://www.arpodyssey.com/index.html

There are lots of useful schematics/picture/instructions and a list of 
very good techs there.

Hope that helps you,

Elliott
On 6 Mar 2005, at 04:15, cyrille wrote:

> hi all
>  
> first i need to explain what we have here
> a mk2 black odyssey with a white vcf board
> it's in europe, so needs 230 vac
> at this time the supply is not wired at all
> i installed a socket/plug, like the ones of computers, cos the 
> original wire was cut and looked bad, and was for us plugs
> all i know is doing a clean solder
> but i need your help to know wich wire goes where
> here we have a quickly made picture of how it looks like
> imagine you're in front of her, with the panel open, as if the 
> keyboard was up
> power supply on the left, socket on the right, power switch upon
>  remenber : mk2 power supply, mk1 power button, 230vac
> anyone would be kind enough to draw the wires on this?
> if you want i can provide the schematics too, but i didn't understand 
> anything of it.........
> THANKS a lot guys, couldn't do that simple thing by myself
>
>
>
> Yahoo! Groups Sponsor
>
> ADVERTISEMENT
> <22305_0205_016_b_300250_a.gif>
> <l.gif>
>
> Yahoo! Groups Links
>
> 	• 	To visit your group on the web, go to:
> http://groups.yahoo.com/group/vintagesynthrepair/
>  
> 	• 	 To unsubscribe from this group, send an email to:
> vintagesynthrepair-unsubscribe@yahoogroups.com
>  
> 	• 	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
> Service.
>
>  <pwrspullyody.bmp>