Vintage Synth Repair

Robert,
 
Here's the only thing I found so far that meets your specs.  http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2556349463&category=32720
 
Is this or something like it usable?  I have done some google searches and found the whole power supply boards but they seem like they are putting out too many amps.  I don't know if thats a problem or not---also the ones I found on mouser.com are about 100$ apiece.  That's fine if it will work.
 
Regards,
Ed

Message: 1
Date: Sat, 6 Sep 2003 08:36:27 -0700 (PDT)
From: Robert Benchic 
Subject: Re: Subject: Re: another broken omni 2

Ed, 

You would be replacing the entire power supply
eliminating the need to repair the regulator in the
original. The connections would be easy, positive and
negative 15 volts DC with a common ground and 115
volts AC. I can find you a supplier and appropriate
model if you like. 

-Bob


--- Ed Hallborg wrote:
> Thanks Robert,
> 
> Can you tell me anymore about these? I'm a bit
> confused as too whether they will take care of the
> -15 voltage regulator problem in the omni 2. Do
> they bypass the regulator or something. Is their a
> special procedure to hook them up?
> 
> Thanks,
> Ed
>
________________________________________________________________________
>
________________________________________________________________________



---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software