Vintage Synth Repair

I am waiting for there reply.... I have contacted them.... I will le you
know

Alex


----- Original Message -----
From: "dbkdjk90278" <dbkdjk@...>
To: <vintagesynthrepair@yahoogroups.com>
Sent: Monday, April 14, 2003 9:59 PM
Subject: [vintagesynthrepair] Re: Wurlitzer 200A speaker......


> Check with "Vintage Vibe".
>
> http://www.wurlitzerreeds.com/ or http://www.vintagevibe.com/
>
> They appear to have new replacement speakers for the 200a
>
> http://cgi.ebay.com/ws/eBayISAPI.dll?
> ViewItem&item=2519325046&category=29552
>
> david
>
>
> --- In vintagesynthrepair@yahoogroups.com, "David"
> <packrat392003@y...> wrote:
> > --- In vintagesynthrepair@yahoogroups.com, "deknoww" <deknow@n...>
> > wrote:
> > > ...i can't imagine any reason not to use an 8 ohm speaker, and
> add
> > an
> > > 8 ohm resistor in series.
> > >
> > >
> >
> > If you use an 8 ohm speaker in series with an 8 ohm resistor, you
> > will have a 16 ohm load, but you will be dissipating half the
> output
> > power in the resistor - so make sure it is large enough to handle
> > half the rated output of the amplifier.
>
>
>
> To unsubscribe from this group, send an email to:
> vintagesynthrepair-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>