i usually start my searching for tube info here - http://tdsl.duncanamps.com/tubesearch.php doesn't have everything but 9 times out of 10 it turns up something. re pinched tubes (from wiki) - "Miniature tubes (e.g., the 12AX7) were introduced around World War II. Wires protruding through the bottom of the glass envelope plugged directly into the socket -- there was no separate base. The pinched-off air evacuation nub was at the top of the tube, giving it its distinctive appearance" sounds like you have a good junk shop near you, i'd love to spend an hour or two in there. andrew --- In tubesynthdiy@yahoogroups.com, "kidkrazy58" <andrewxx58@...> wrote: > > it was ok but i got it for the tubes mainly and paid like 40 for it. > it had these 7119 tubes in them actuelly 5 of them and 11 other tubes > one telefunken 12au7. The 7119s say made in holland but arnet marked > amprex but are marked Beckman. they have a d getter like the old > amprex are supposed to but i dont know.imtrying to find the value of > these. i cant tell if the tops are pinched what does a pinched tip > look like on a tube cause in the example i couldnt see a diffrence. ok > thanks >
Message
Re: i got ahold of a pulse width osc. from 1 to 17,000 cycles
2007-04-28 by bbluthang
Attachments
- No local attachments were found for this message.