Sequential circuits samplers

I think you need a new floppy drive, I think I have seen Fh but can't remember what it was. I replaced the drives anyway.

--- In prophet2000@yahoogroups.com, charlie 'chop' copp <charles.copp@...> wrote:
>
> i use 720 only disks!
> 
> my manuals are packed away  try later after the move!!
> 
> 
> charles
> 
> 
> 
> 
> 
> ----- Original Message -----
> From: "duncan" <ferrograph@...>
> To: <prophet2000@yahoogroups.com>
> Sent: Saturday, August 06, 2011 3:22 PM
> Subject: [prophet2000] Re: Fh disk error?
> 
> 
> > apologies if this is a rather obvious question, but have you tried saving
> something to a known good blank disc, formatted on the machine?  720k or
> 1440k.....
> >
> > also, have a look at the short annotated guide in the files section.
> there's a chunk of it dedicated to disc ops display codes.... looking at
> that again, it occurs to me to suggest you might be seeing "Fd" (format
> disc) with the display missing a LED. is the display ok in other modes?
> >
> > have you tried moving the parameter knob or buttons while in disc mode?
> sorry if these are stupid questions, but the machine can seem quite arcane,
> this far from 1984....
> >
> > d.
> >
> >
> >
> >
> > --- In prophet2000@yahoogroups.com, "x" <denshiblocks@> wrote:
> > >
> > > hi folks, im trying to get a sick p2k back on its feet.  the unit loads
> presets fine and plays those sounds, so i know its at least semi functional.
> however when i attempt to load from a disk i get this error: "Fh"  i cant
> find Fh in any of the documentation im looking through.  i have tried two
> separate drives in the unit, i can hear the drive spin up, but there is
> obviously an error.  am i doing something wrong, or do i need to start
> poking through the floppy controller section?
> > >
> >
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>