Discussion about the Korg PolySix synthesizer

Good question.

Donald Williams
Account Development Manager
US LEC Raleigh
Phone 919-719-1374
Pager 888-598-9917

> -----Original Message-----
> From: Orlandi Marco [SMTP:Marco.Orlandi@icn.siemens.it]
> Sent: Tuesday, July 25, 2000 9:40 AM
> To: polysix@egroups.com
> Subject: [PolySix] pedals for vcf in
>
> hi all
> What kind of pedal (in the market today 's or used) I have to buy to
> plug it to the Vcf in of my Polysix?
> thank in advance
> Marco
>
>
> ------------------------------------------------------------------------
> Failed tests, classes skipped, forgotten locker combinations.
> Remember the good 'ol days
> http://click.egroups.com/1/7076/4/_/_/_/964532667/
> ------------------------------------------------------------------------
>
> To unsubscribe from this group, send an email to:
> PolySix-unsubscribe@egroups.com
>
>

You need a pedal with a bipolar voltage source (+/-5V). The pedal
should have a middle position to be able to bend the filter up and
down (similar to the pitch bend wheel). I never saw such a pedal.
Thats the reason why I rerouted the VCF pedal input via a programmable
switch to the pitch bend wheel. You can now choose between Pitch Bend
and Filter Bend per Patch. On the other hand I use the VCF pedal input
jack for a modulation pedal which duplicates the action of the
modulation wheel which I made follow the programmed LFO mode
(VCO/VCF/VCA).
This and some other features, besides MIDI, is part of the MIDI kit
I made and which is available from me. Have a look at:
http://www.iotech.no/analog/polysix/index.htm

Cheers

Johannes


PolySix@egroups.com wrote:

>
> hi all
> What kind of pedal (in the market today 's or used) I have to buy to
> plug it to the Vcf in of my Polysix?
> thank in advance
> Marco
>
> ------------------------------------------------------------------------
> Failed tests, classes skipped, forgotten locker combinations.
> Remember the good 'ol days
> http://click.egroups.com/1/7076/4/_/_/_/964532667/
> ------------------------------------------------------------------------
>
> To unsubscribe from this group, send an email to:
> PolySix-unsubscribe@egroups.com