Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Archive for polysix.

Index last updated: 2026-03-30 01:17 UTC

Thread

Group Message issues?

Group Message issues?

2018-04-05 by josh.nursing@gmail.com

I made a new Topic asking some questions about my Polysix issues and they don't appear.

I replied to a post by Malte concerning C16 on the voice bard and it doesn't appear either.

My reply to a fellow member asking about greenish residue on some caps does appear though.

Has anyone else noticed issues with posting to the Group?

Yash


Re: [PolySix] Group Message issues?

2018-04-05 by Ben Stuyts

Hi Josh,

Moderator speaking here… I see several messages from you in the last few hours and some going back to March 30. Are those the ones you are referring to?

Ben

On 5 Apr 2018, at 23:43, josh.nursing@gmail.com [PolySix] <PolySix@yahoogroups.com> wrote:



I made a new Topic asking some questions about my Polysix issues and they don't appear.

I replied to a post by Malte concerning C16 on the voice bard and it doesn't appear either.

My reply to a fellow member asking about greenish residue on some caps does appear though.

Has anyone else noticed issues with posting to the Group?

Yash





Re: [PolySix] Group Message issues?

2018-04-06 by Ben Stuyts

And the one about the C16 never arrived at Yahoo from looking at the logs. So not much I can do there.

Ben

On 6 Apr 2018, at 01:55, Ben Stuyts yahoo@stuyts.nl [PolySix] <PolySix@yahoogroups.com> wrote:



Hi Josh,

Moderator speaking here… I see several messages from you in the last few hours and some going back to March 30. Are those the ones you are referring to?

Ben

On 5 Apr 2018, at 23:43, josh.nursing@gmail.com [PolySix] <PolySix@yahoogroups.com> wrote:



I made a new Topic asking some questions about my Polysix issues and they don't appear..

I replied to a post by Malte concerning C16 on the voice bard and it doesn't appear either.

My reply to a fellow member asking about greenish residue on some caps does appear though.

Has anyone else noticed issues with posting to the Group?

Yash








Re: Group Message issues?

2018-04-06 by josh.nursing@gmail.com

Hey Ben,

I've been quite active today for sure as my Polysix is currently open for diagnosis and repair. Hope I wasn't causingtoo much inconvenience.

I was referrin about the posts today itself.

Regards,

Yash

Re: Group Message issues?

2018-04-06 by josh.nursing@gmail.com

I wrote a second one for the C16 cap. Hope this went through, I haven't checked, I was mostly the nose in the P6 before and after dinner.

Re: Group Message issues?

2018-04-06 by josh.nursing@gmail.com

I still don't see my topic. It was about having a few issues, namely the VCA Attenuator being flaky, the Release knob not working and not getting a full throw onthe Cutoff Frequency knob.

Must the Topics be approved before being sent? I don't remember.

Re: [PolySix] Group Message issues?

2018-04-06 by Ben Stuyts

Hi Josh,

No, once you’re a member of this group, no approval of any messages is required. Unless you have misbehaved and I set your status to moderated. :) 

To be sure I checked the queue if there were any message to be approved and there were none. Yahoo logs indicate no other messages from you received, so it’s out of my reach of influence. I think it must be an issue between you, your ISP and/or yahoo I’m afraid.

Ben

On 6 Apr 2018, at 02:58, josh.nursing@gmail.com [PolySix] <PolySix@yahoogroups.com> wrote:



I still don't see my topic. It was about having a few issues, namely the VCA Attenuator being flaky, the Release knob not working and not getting a full throw onthe Cutoff Frequency knob.

Must the Topics be approved before being sent? I don't remember. 


Re: Group Message issues?

2018-04-06 by josh.nursing@gmail.com

Hi Ben,

I just wrote another Topic on my questions on Grounding before I embark on some big changed in the synth.

Can you see it? I just posted it a minute or so ago or less.

Best,

Yash

Re: [PolySix] Group Message issues?

2018-04-06 by Ben Stuyts

No inconvenience at all! Sorry to hear you’re having problems. Some things to try:

- Try again and make sure you are sending from the e-mail address that you have used to subscribe to this list. Messages from non-subscribed addresses won’t get through.
- Check your inbox / spam folder for any bounce messages from Yahoo. Perhaps there’s a clue there.
- Try logging into the group at https://groups.yahoo.com/neo/groups/PolySix/conversations/messages and use the web interface to send your message.

Ben

On 6 Apr 2018, at 02:54, josh.nursing@gmail.com [PolySix] <PolySix@yahoogroups.com> wrote:



Hey Ben,

I've been quite active today for sure as my Polysix is currently open for diagnosis and repair. Hope I wasn't causingtoo much inconvenience.

I was referrin about the posts today itself.

Regards,

Yash 


Re: Group Message issues?

2018-04-06 by josh.nursing@gmail.com

The Grounding Topic post went through all right, but no sign at all of the other Topic I posted twice.

Very odd!

Yash

Re: [PolySix] Re: Group Message issues?

2018-04-06 by <backshall1@bellsouth.net>

Yesterday I got this email from Yahoo mail server about a message I posted on Apr 1:
 
failure notice
Hi. This is the qmail-send program at m14.grp.bf1.yahoo.com.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.

<polysix@yahoogroups.com>:
values:[backshall1@bellsouth.net][polysix][polysix@yahoogroups.com]
av:0
remote_ip=98.139.170.167
Can't find Map server : 10.193.36.183:2326
Read messageId: [<5BAD06861E534B5095B8A80977F8E8BE@WINDOWS8TVE4HA>]
Can't find AutoResp server : 10.193.84.61:1114
Pid: 60743 Processing:(mail,us,backshall1@bellsouth.net,polysix)(backshall1@bellsouth.net,(null))Domain:yahoogroups.com)
[04/04 16:40:51] GSLOG:gsConnect:service(GS_SERVICE_GROUP-GS_GROUP_CMD_SET_CURRENT_GROUP):host(10.193.39.158:2824):location(gs;area813/94/48/g1994894):connTimeout(500):err(0)
getSubs: main db dbSubGetSet err=-9997
dosend: fatal: getSubs failed: PolySix
I'm not going to try again; this message has been in the queue too long.
 
 
Sent: Thursday, April 5, 2018 9:17 PM
Subject: [PolySix] Re: Group Message issues?
 
 

The Grounding Topic post went through all right, but no sign at all of the other Topic I posted twice.

Very odd!

Yash

Re: [PolySix] Re: Group Message issues?

2018-04-06 by Ben Stuyts

Thanks, looks like Yahoo groups had some issues!

Ben

On 6 Apr 2018, at 04:49, backshall1@bellsouth.net [PolySix] <PolySix@yahoogroups.com> wrote:



Yesterday I got this email from Yahoo mail server about a message I posted on Apr 1:
 
failure notice
Hi. This is the qmail-send program at m14.grp.bf1.yahoo.com.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.

<polysix@yahoogroups.com>:
values:[backshall1@bellsouth.net][polysix][polysix@yahoogroups.com]
av:0
remote_ip=98.139.170.167
Can't find Map server : 10.193.36.183:2326
Read messageId: [<5BAD06861E534B5095B8A80977F8E8BE@WINDOWS8TVE4HA>]
Can't find AutoResp server : 10.193.84.61:1114
Pid: 60743 Processing:(mail,us,backshall1@bellsouth.net,polysix)(backshall1@bellsouth.net,(null))Domain:yahoogroups.com)
[04/04 16:40:51] GSLOG:gsConnect:service(GS_SERVICE_GROUP-GS_GROUP_CMD_SET_CURRENT_GROUP):host(10.193.39.158:2824):location(gs;area813/94/48/g1994894):connTimeout(500):err(0)
getSubs: main db dbSubGetSet err=-9997
dosend: fatal: getSubs failed: PolySix
I'm not going to try again; this message has been in the queue too long.
 
 
From: josh.nursing@gmail.com [PolySix]
Sent: Thursday, April 5, 2018 9:17 PM
Subject: [PolySix] Re: Group Message issues?
 

The Grounding Topic post went through all right, but no sign at all of the other Topic I posted twice.

Very odd!

Yash




Re: Group Message issues?

2018-04-06 by josh.nursing@gmail.com

I just posted a reply to Simon and it doesn't appear either.

Yahoo is still having issues (posted from Yahoo's own Group Web software...)

Yash

Re: Group Message issues?

2018-04-06 by josh.nursing@gmail.com

Even their message for delivery looks fishy:

"Your message has been successfully submitted and would be delivered to recipients shortly."

would be delivered.

So oddly worded...

Yash

Re: Group Message issues?

2018-04-06 by josh.nursing@gmail.com

Please check this from the Yahoo Groups Web interface:

a) Try to add a message to a conversation by hitting "Reply"

versus

b) Adding a message to a conversation by using the "Add to conversation" input.

I believe the irst one isn't working at all.

Yash

Re: [PolySix] Re: Group Message issues?

2018-04-06 by Chromatest J. Pantsmaker

Another yahoo group I'm on is having similar issues I think. One person has complained about it.

On Apr 6, 2018 8:36 AM, "josh.nursing@gmail.com [PolySix]" <PolySix@yahoogroups.com> wrote:


Please check this from the Yahoo Groups Web interface:

a) Try to add a message to a conversation by hitting "Reply"

versus

b) Adding a message to a conversation by using the "Add to conversation" input.

I believe the irst one isn't working at all.

Yash

Re: [PolySix] Group Message issues?

2018-04-06 by Ben Stuyts

It’s a problem on all Yahoo groups from what I’ve been reading. Same error messages (if any) as the one posted a few messages before. Been going on since last month it seems.

And there is *NO* way to contact Yahoo about this…

Ben

On 6 Apr 2018, at 21:50, 'Chromatest J. Pantsmaker' chromatest@azburners.org [PolySix] <PolySix@yahoogroups.com> wrote:



Another yahoo group I'm on is having similar issues I think. One person has complained about it.

On Apr 6, 2018 8:36 AM, "josh.nursing@gmail.com [PolySix]" <PolySix@yahoogroups.com> wrote:


Please check this from the Yahoo Groups Web interface:

a) Try to add a message to a conversation by hitting "Reply"

versus

b) Adding a message to a conversation by using the "Add to conversation" input.

I believe the irst one isn't working at all.

Yash