Discussion about the Korg PolySix synthesizer

Hi, does anyone know how can I sync the arpg. of a polysix and a poly
61?

Thanks

By sending them the same clock signal in parallel

----- Original Message -----
From: "polyboly" <polyboly@yahoo.com.mx>
To: <PolySix@yahoogroups.com>
Sent: 30 November 2003 03:29
Subject: [PolySix] Arpgtos.


> Hi, does anyone know how can I sync the arpg. of a polysix and
a poly
> 61?
>
> Thanks
>
>
> ------------------------ Yahoo! Groups
Sponsor ---------------------~-->
> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or
Lexmark
> Printer at MyInks.com. Free s/h on orders $50 or more to the US
& Canada.
> http://www.c1tracking.com/l.asp?cid=5511
> http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/QnLolB/TM
> ---------------------------------------------------------------
------~->
>
> To unsubscribe from this group, send an email to:
> PolySix-unsubscribe@yahoogroups.com
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>

The ARP Trig in Jack is what it says - an input for triggering the
ARP from an external source. If you want to sync one Polysix (the
Poly61 is the same in this respect) to another you cannot do this
as is. But it should be easy to modify the synth to supply the ARP
clock signal; e.g. via a normalized jack. The ARP clock signal is
routed through the ARP IN jack this way:

tip sleeve
to Key Assigner CPU ------<---V |#|
^ | |
| |#|
from ARP clock generator ------>-+ |
---

You can do this:
tip sleeve
to Key Assigner CPU ------<--V |#|
^ | |
| ^ |#|
from ARP clock generator ------>-*--+ |
ring ---

The ARP clock signal has a 10k resistor in series - it is save to
short to ground with a normal (mono) plug. To just take the signal
for syncing a second machine you have to make a special cable:
a stereo plug to a mono plug, connecting tip to ring in the stereo
plug.

Johannes


polyboly wrote:

> Hi, does anyone know how can I sync the arpg. of a polysix and a poly
> 61?
>
> Thanks
>
>
>
> To unsubscribe from this group, send an email to:
> PolySix-unsubscribe@yahoogroups.com
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>

Thank you Johannes for the information I'll try to make it ASAP!!

Fritz.

--- In PolySix@yahoogroups.com, Johannes Hausensteiner
<jo.synth@c...> wrote:

> The ARP Trig in Jack is what it says - an input for triggering the
> ARP from an external source. If you want to sync one Polysix (the
> Poly61 is the same in this respect) to another you cannot do this
> as is. But it should be easy to modify the synth to supply the ARP
> clock signal; e.g. via a normalized jack. The ARP clock signal is
> routed through the ARP IN jack this way:
>
> tip sleeve
> to Key Assigner CPU ------<---V |#|
> ^ | |
> | |#|
> from ARP clock generator ------>-+ |
> ---
>
> You can do this:
> tip sleeve
> to Key Assigner CPU ------<--V |#|
> ^ | |
> | ^ |#|
> from ARP clock generator ------>-*--+ |
> ring ---
>
> The ARP clock signal has a 10k resistor in series - it is save to
> short to ground with a normal (mono) plug. To just take the signal
> for syncing a second machine you have to make a special cable:
> a stereo plug to a mono plug, connecting tip to ring in the stereo
> plug.
>
> Johannes
>
>
> polyboly wrote:
> > Hi, does anyone know how can I sync the arpg. of a polysix and a

poly

> > 61?
> >
> > Thanks
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > PolySix-unsubscribe@yahoogroups.com
> >
> > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >
> >
> >