Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Archive for polysix.

Index last updated: 2026-03-30 01:17 UTC

Thread

Replacement Polysix Knobs?

Replacement Polysix Knobs?

2014-02-27 by <pushwithlegs@gmail.com>

Hey all,
I'm well aware that there is no source for original Korg Polysix knobs (outside of the occasional high priced ebay listing for one or two) thus for my backup Polysix I'm restoring I'm thinking of just replacing the entire set with something compatible in size (ie: what is used for the Polysex mod)
Can anyone point me toward the mouser etc part number that will fit on the pentiometer shaft correctly?
many thanks!

RE: Replacement Polysix Knobs?

2014-02-28 by <babouche369@hotmail.com>

It could be a good candidate to 3D printing, if someone has the tool to model one knob. I repaired a broken key on a Yamaha QX1 that way.

Francois

Re: [PolySix] Replacement Polysix Knobs?

2014-02-28 by Dennis Matana

Hi,

www.syntaur.com has them in the usa and http://synthalog.com/ has them in europe to for 6 euro's a piece.
 
 
                           


On Friday, February 28, 2014 12:59 AM, "pushwithlegs@gmail.com" <pushwithlegs@gmail.com> wrote:
 
Hey all,
I'm well aware that there is no source for original Korg Polysix knobs (outside of the occasional high priced ebay listing for one or two) thus for my backup Polysix I'm restoring I'm thinking of just replacing the entire set with something compatible in size (ie: what is used for the Polysex mod)
Can anyone point me toward the mouser etc part number that will fit on the pentiometer shaft correctly?
many thanks!