Discussion about the Korg PolySix synthesizer

Hi to all. well I had a brain storm last night and pulled the ic 22 from klm367 board and put it on a breadboard supplied it with power and ground and it still heats up in about 30 seconds to the point were you have to take your finger off. so I am looking for a replacement anyone have any ideas?

---- vaporlock_32578@yahoo.com wrote:

=============
Hi to all. well I had a brain storm last night and pulled the ic 22 from klm367 board and put it on a breadboard supplied it with power and ground and it still heats up in about 30 seconds to the point were you have to take your finger off. so I am looking for a replacement anyone have any ideas? thanks
Ken

==================================================
Here's one hope:
https://groups.yahoo.com/neo/groups/PolySix/conversations/topics/1636
====================================================

 

---- vaporlock_32578@yahoo.com wrote:

=============
Hi to all. well I had a brain storm last night and pulled the ic 22 from klm367 board and put it on a breadboard supplied it with power and ground and it still heats up in about 30 seconds to the point were you have to take your finger off. so I am looking for a replacement anyone have any ideas? thanks
Ken

==================================================
Here's one hope:
https://groups.yahoo.com/neo/groups/PolySix/conversations/topics/1636
====================================================

HI Ken,