Yahoo Groups archive
Thread
2012-08-11 by marcomir27
Hello, I need help with my Polysix. Here's the "symptoms": 1) All LEDs are staying on after power-up (tape is disabled); OR 2) Everything is fine, but after 2-3 minutes it automatically returns to Patch 1, Bank 1. Any idea ? BTW, mine was recently restored with the KLM board clone. It worked well for a couple months before these problems appeared. Many thanks ! -Nicolas
2012-08-11 by backshall1
Sounds like maybe a loose cable (CN10) between the KLM-367 and the patch buttons board. Don B. _____
From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of marcomir27 Sent: Saturday, August 11, 2012 3:29 PM To: PolySix@yahoogroups.com Subject: [PolySix] Restored Polysix acting out. Help ! Hello, I need help with my Polysix. Here's the "symptoms": 1) All LEDs are staying on after power-up (tape is disabled); OR 2) Everything is fine, but after 2-3 minutes it automatically returns to Patch 1, Bank 1. Any idea ? BTW, mine was recently restored with the KLM board clone. It worked well for a couple months before these problems appeared. Many thanks ! -Nicolas [Non-text portions of this message have been removed]
2012-08-11 by The Old Crow
This sounds like the reset threshold trimmer (VR1) needs a small tweak. Crow /**/
On 8/11/2012 2:28 PM, marcomir27 wrote: > Hello, > > I need help with my Polysix. Here's the "symptoms": > > 1) All LEDs are staying on after power-up (tape is disabled); OR > 2) Everything is fine, but after 2-3 minutes it automatically returns to Patch 1, Bank 1. > > Any idea ? > > BTW, mine was recently restored with the KLM board clone. It worked well for a couple months before these problems appeared. > > Many thanks ! > -Nicolas > > > > ------------------------------------ > > Yahoo! Groups Links > > >
2012-08-12 by marcomir27
I've checked inside and re-ajusted a few connectors (including CN10). So far, it seems to have fixed the problem. I'll keep a close on eye on the "patient" and report back if needed. Thanks for the help ! -N --- In PolySix@yahoogroups.com, The Old Crow <oldcrow@...> wrote:
> > This sounds like the reset threshold trimmer (VR1) needs a small tweak. > > Crow > /**/ > > On 8/11/2012 2:28 PM, marcomir27 wrote: > > Hello, > > > > I need help with my Polysix. Here's the "symptoms": > > > > 1) All LEDs are staying on after power-up (tape is disabled); OR > > 2) Everything is fine, but after 2-3 minutes it automatically returns to Patch 1, Bank 1. > > > > Any idea ? > > > > BTW, mine was recently restored with the KLM board clone. It worked well for a couple months before these problems appeared. > > > > Many thanks ! > > -Nicolas > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > > > >