Discussion about the Korg PolySix synthesizer

hello
i have just a little question about the battery
on the schematics and the service manual it is said that the output of the battery must be between 3.0 and 4.2 volt 
what could be happen to a polysix if the output delivered by the battery if less than 3.0 ?

regards

hello
i have just a little question about the battery
on the schematics and the service manual it is said that the output of the battery must be between 3.0 and 4.2 volt 
what could be happen to a polysix if the output delivered by the battery if less than 3.0 ?

regards

On 14 Dec 2011, at 20:28, Ainardi wrote:

> hello
> i have just a little question about the battery
> on the schematics and the service manual it is said that the output of the battery must be between 3.0 and 4.2 volt 
> what could be happen to a polysix if the output delivered by the battery if less than 3.0 ?

It would start to loose its memory.

Ben

Just a quick reminder:

The 5514AP/APL has a range of 2 to 5.5 volts for the data retention supply
voltage. So as long as the voltage is above 2 volts no memory loss should
occur.