Discussion about the Korg PolySix synthesizer

I think mine must have been at about 1 oclock. I cant
beleive how good it was even though the battery was
original. just raid an old 486 for a diode and a dead
P2 board for a battery and battery holder.

installed the components without completely removing
the board, just undid the orange connector and lifted
it up.

works great now, remembers the settings. even got the
last key working now !

next project, replace 5 of the buttons which are hard
to press and install a midi kit.

curious, anyone ever consider putting a 2nd K366 board
in to double the osscilators and filters for a fatter
sound?

but that unit with 2 bad boards, sounds like it was
way past the 12th hour !

Bill


__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com

On Fri, 28 Jun 2002, bob bubba wrote:

> curious, anyone ever consider putting a 2nd K366 board
> in to double the osscilators and filters for a fatter
> sound?

I put a 2nd VCO set into one of my Polysixes. Not a complete KLM-366,
but a circuit board with six VCOs and enough opamps to blend the two oscs.
There are only two controls, 'octave' and 'detune' on the 2nd VCO, but it
sure sounds nice.

Crow
/**/