Yahoo Groups archive
Thread
2007-10-21 by sdlarch1
The procedure reads: (8)VCF RESONANCE adjustment Set OCTAVE to 8, WAVEFORM to PW and PW/PWM to 10. Check CN05-7 with DVM and adjust to obtain 0.000V +/-20mV What is it that I am supposed to adjust to get the 0V?
2007-10-21 by Johannes Hausensteiner
the RESONANCE knob sdlarch1 wrote:
> The procedure reads: > > (8)VCF RESONANCE adjustment > Set OCTAVE to 8, WAVEFORM to PW and PW/PWM > to 10. Check CN05-7 with DVM and adjust to obtain > 0.000V +/-20mV > > What is it that I am supposed to adjust to get the 0V? > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > Yahoo! Groups Links > > > >
2007-10-21 by Sam Larch
The resonance knob is having no effect on the voltage level. ??
On 10/21/07, Johannes Hausensteiner <johau@gmx.net> wrote: > the RESONANCE knob > > > sdlarch1 wrote: > > The procedure reads: > > > > (8)VCF RESONANCE adjustment > > Set OCTAVE to 8, WAVEFORM to PW and PW/PWM > > to 10. Check CN05-7 with DVM and adjust to obtain > > 0.000V +/-20mV > > > > What is it that I am supposed to adjust to get the 0V? > > > > > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > > Yahoo! Groups Links > > > > > > > > >
2007-10-22 by Johannes Hausensteiner
Sorry, I was mistaken. You have to adjust the Cutoff Frequency knob. Sam Larch wrote:
> The resonance knob is having no effect on the voltage level. ?? > > > On 10/21/07, Johannes Hausensteiner <johau@gmx.net> wrote: >> the RESONANCE knob >> >> >> sdlarch1 wrote: >>> The procedure reads: >>> >>> (8)VCF RESONANCE adjustment >>> Set OCTAVE to 8, WAVEFORM to PW and PW/PWM >>> to 10. Check CN05-7 with DVM and adjust to obtain >>> 0.000V +/-20mV >>> >>> What is it that I am supposed to adjust to get the 0V? >>> >>> >>> >>> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 >>> Yahoo! Groups Links >>> >>> >>> >>> > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > Yahoo! Groups Links > > > >