I got SOUND
2005-10-13 by lnz2166
Thanks to all who gave suggestions on my recently purchased Polysix blue light special. Here is what I've done so far: 1. Power Supply was blown. Changed the lytics, diodes, and regulators. Little did I know until today that the surge of energy that blasted the diodes and regulators blasted a solder pad on the +15v trace feeding the power supply connectors and was the causing the "No Sound" syndrome. It was interesting the the +15v Test Point read 15v solid. Until I started measuring op amp supply voltages did I notice that they were all screwed up. 2. Changed Battery, and 74LS08 and repaired traces. Programs seem to store intermittantly. I'll need to further investigate. 3. Changed lytics on 366 board. Planing on doing the rest. Interesting enough, all the old lytics were in good shape and with in tolerance. Keep you guys posted. P.S. I was able to find crosses to all of the regulators and transistors. Email me if you need the crosses.
