Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Index last updated: 2026-04-28 23:40 UTC

Message

Re: [PolySix] Re: Polysix keyboard assigner fixed !!!!

2004-12-14 by Guille

Hi, Oxygeno!
And how did you solve the arpegiator problem? i've got the same one!

Thanks.

Guille
  ----- Original Message ----- 
  From: oxygeno1313 
  To: PolySix@yahoogroups.com 
  Sent: Tuesday, December 14, 2004 5:17 AM
  Subject: [PolySix] Re: Polysix keyboard assigner fixed !!!!



  I'm happy now because i finally could fix my POLYSIX, the problem was 
  the quartz, both quartz were failing, so i want to say thanks to 
  Johannes, Greg Montalbano and Old Crow for the Support !!! They did a 
  great job !


  Greetings and happy holidays,

  oxygeno1313


  --- In PolySix@yahoogroups.com, "oxygeno1313" <oxygeno1313@y...> 
  wrote:
  > 
  > 
  > Hi everybody,
  > 
  > i'm new here in the group,, and i got a problem with a P6. The 
  first 
  > thing, is the KLM-367 board, was a victim of the battery leackage, 
  > but someone made the repair before i bought the P6. I discover that 
  > the control pots have some latency and tjhere's no clean sweep on 
  the 
  > pots, sounds like steps and latency. i checkd every trace that goes 
  > to the CPU 8048 and all the traces are fine, i used a DVM to check 
  > them. Also i replaced the bus drivers 74LS08 and everythings is 
  fine, 
  > i cannot find the fail. 
  > 
  > The 2nd problem is the key assigner, something is wrong ! When i 
  play 
  > the keyboard exhist some latency after i play a note, the ARP are 
  not 
  > rhythmic, there's like .... 1-22222-3-4-5555-6 it should be 1-2-3-4-
  5-
  > 6, some notes hang some milliseconds but not always is the same 
  VCO. 
  > I exchanged the 8049 and replaced some IC's related to the CPU, but 
  > the problem persist. I check too many times the connectors and 
  > traces, but nothing out of normal. 
  > 
  > 
  > I was searching and reading almost all the messages from this 
  forum, 
  > but seems that this is thhe first case of this problem. 
  > 
  > 
  > Hope someone can help to find the problem.
  > 
  > Regards,
  > 
  > oxygeno
  > 
  > P.D. Sorry for my bad english ! Cheers





  PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 


        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       


------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/PolySix/
      
    b.. To unsubscribe from this group, send an email to:
    PolySix-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.