sounds like a lfo problem
----- Original Message -----
From: reidar@jorgensen.com
To: PolySix@yahoogroups.com
Sent: Monday, July 19, 2004 1:47 AM
Subject: Re: [PolySix] Son of a b****
That sounds like what my P6 is doing too - like the mod wheel is fully on.
Everything is 'bubbling'. I have found that the PWM width control seems to
have the best effect on it, but also, if I leave the P6 switched on for an
hour or so, it goes away. I'm not an electronics-type, so I really don't
have a clue, but the fact that it goes away (usually) after a long warm-up
might mean something to some of you?
Reidar
"toorglick"
<toorglick@yahoo. To: PolySix@yahoogroups.com
com> cc:
Subject: [PolySix] Son of a b****
19/07/2004 04:44 Classification: |-------------------|
AM | ( ) In-Confidence |
Please respond to | ( ) Unclassified |
PolySix |-------------------|
For the love of Pete. The distortion is still there. FWIW, it
actually sounds more like something osciallating at a high
frequency. I went through and checked the continuity of some more
traces and everything checked out okay. I jumped a couple of
suspicious traces.
My only thought now, at least in regards to what *I* can do next, is
to remove the jumps I put in over the past two days and start over
from there. IC30 seems to be okay based on what I could measure.
Of course, now the patch and bank buttons are going haywire.
Does anyone see anything in my descriptions that could help?
PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
Yahoo! Groups Sponsor
ADVERTISEMENT
[IMAGE]
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/PolySix/
To unsubscribe from this group, send an email to:
PolySix-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
****************************************************************
NOTICE - This message is intended only for the use of the
addressee named above and may contain privileged and
confidential information. If you are not the intended recipient
of this message you are hereby notified that you must not
disseminate, copy or take any action based upon it. If you
received this message in error please notify HIC immediately.
Any views expressed in this message are those of the individual
sender, except where the sender specifically states them to be
the views of HIC.
****************************************************************
PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/PolySix/
b.. To unsubscribe from this group, send an email to:
PolySix-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]Message
Re: [PolySix] Son of a b****
2004-07-19 by BrainSlayer