Discussion about the Korg PolySix synthesizer

I mounted the 5 DIN connector just after the "tape from" jack, so 
it "looks" stock.... inside, I installed two long screws of the left 
side which goes from the bottom of the metal case (just where the 
bottom screws goes in oreder to attach it to the wood) and mounted 
the retrofit to those screws so it goes just above the left most 
circuit board.


--- In PolySix@yahoogroups.com, "cavernosum6" <greg.montalbano@u...> 
wrote:
> Thanks, mon -- that's the kind of feedback I need.
> 
> ~GMM
> 
> 
> --- In PolySix@yahoogroups.com, "synapticide" <medsec@g...> wrote:
> >
> > As someone who only uses the Six in the studio and has no 
intention 
> > of gigging with it (and probably wouldn't use it as a master 
> > controller if I did gig), I wouldn't lay out the extra cash for 
the 
> > Miditek. As a matter of fact, even if I did want those extra 
features 
> > I would be very hesitant to install something that robbed me of 
the 
> > arpeggiator. Both of those prices sound quite reasonable though, 
and 
> > if it didn't involve shipping my beloved beast I'd probably be 
> > knocking on your door. 
> > 
> > I'm gonna have to check out that Bojan design, it's sounding more 
> > intriguing all the time. The way I would like to be able to fit 
it is 
> > so the installation isn't irreversable and isn't destructive to 
the 
> > casing - so that the Six could be returned to stock. Maybe run 
the 
> > MIDI In connector cable out through an unused jack hole with the 
1/4" 
> > jack removed and just have the MIDI In connection hanging out of 
> > there, etc.
> > 
> > Just as long as it doesn't affect the sound...
> > 
> > Peace,
> > Ron