Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Index last updated: 2026-04-28 23:40 UTC

Message

Re: [PolySix] What is likely to cause pitch drifts ?

2004-03-14 by The Old Crow

Based on the MS-10 service manual pdf, I would suspect the sample/hold
section around parts F2/C4/IC3.  I would try replacing C4 first, then IC3,
and lastly FET2.

Crow
/**/

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.