Shouldn't be a problem; newer caps are generally better quality (and smaller!) than the ones made 20-30 years ago. ~GMM At 05:20 PM 2/6/04 +0000, you wrote: >Thanks, > >done that as well as replacing the battery and all works fine ! > >BTW, I noticed the sign "(M)" on both large original power supply >capacitors, but replaced with ones that doesn't have that sign on >them, is it OK ? I know that the "M" signs mean 20% tolerance ... > > >--- In PolySix@yahoogroups.com, greg montalbano ><greg.montalbano@u...> wrote: > > At 11:59 AM 2/6/04 +0000, you wrote: > > >My question is if by any way replacing the two large capacitors on > > >the powersupply (2200uF and 4700uF) can change the voltages in the > > >circuit and make it out of tune in any way ?.... I;m afraid that > > >voltage changes will make some VR's set diffenrent values making >all > > >type of tunings changed. > > > > > >Thanks > > > > Replacing the filter caps in the power supply should not cause any >change > > in the voltage output -- but if it does, the powersupply trims are >easy > > (I'm assuming you have a meter & know how to use it). > > Just be careful, working with the power supply; use caps of the >same value > > with the same or higher voltage rating, watch out for the polarity, >and > > check the power supply output before you plug in the CPU & Audio >boards. > > > > ~GMM > > > > [Non-text portions of this message have been removed] > > > >PolySix "Digiest" Page: ><http://www.acc.umu.se/~amber/Poly6>http://www.acc.umu.se/~amber/Poly6 > > > >---------- >Yahoo! Groups Links > * To visit your group on the web, go to: > * > <http://groups.yahoo.com/group/PolySix/>http://groups.yahoo.com/group/PolySix/ > * > * To unsubscribe from this group, send an email to: > * > <mailto:PolySix-unsubscribe@yahoogroups.com?subject=Unsubscribe>PolySix-unsubscribe@yahoogroups.com > > * > * Your use of Yahoo! Groups is subject to the > <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service. [Non-text portions of this message have been removed]
Message
Re: [PolySix] Re: Got a Polysix !
2004-02-06 by greg montalbano
Attachments
- No local attachments were found for this message.