Discussion about the Korg PolySix synthesizer

OK, one of the acceptable numbers is ALPS #SKHCAB -- Mouser electronics 
sells them as #688-SKHCAB, for about .66 each.
Other possible substitute: Omron B3F-4000.

As I recall, the procedure is to first delsolder the LED, which is holding 
the switch cap on.  After that's removed, the four switch legs can be 
desoldered.

Good luck.




>Date: Tue, 02 Dec 2003 09:28:47 -0800
>To: PolySix@yahoogroups.com
>From: greg montalbano <greg.montalbano@ucop.edu>
>Subject: Re: [PolySix] Re: Replacement tactile switch and volume pot
>
>Hi-
>I've replaced several of the switches -- they're available off-the-shelf 
>from a number of suppliers (will get you some numbers tonight). 
>Unfortunately, that's only the switch -- the switch CAPS are not available 
>from any source I know of.  (standard procedure is to save the old switch 
>cap & mount it on the new switch).
>As for the volume pot -- it's just a 10K linear taper pot;  any one of 
>that value that's the same size will work just fine.  Check out the online 
>catalogs for whatever electronics suppliers you use.
>
>~GMM
>
>At 04:30 AM 12/2/03 +0000, you wrote:
>>No one here has ever replaced these particular parts?
>>
>>
>>--- In PolySix@yahoogroups.com, "toorglick" <toorglick@y...> wrote:
>> > I love my revived PolySix.  It only needs two more items to be
>> > completely restored:  a replacement tactile switch for program
>>button
>> > number four and the volume pot needs to be replaced.  When I go to
>>my
>> > electronics parts supplier, what should I ask for?
>> >
>> > Thanks,
>> > Rich
>>
>>
>>Yahoo! Groups 
>>Sponsor<http://rd.yahoo.com/SIG=12cdgi7cl/M=266807.4061687.5387718.2248467/D=egroupweb/S=1705032144:HM/EXP=1070425839/A=1861993/R=1/*http://click.atdmt.com/AVE/go/yhxxxbre02200370ave/direct;wi.300;hi.250/01/&time=1070339439623302> 
>>
>>
>>To unsubscribe from this group, send an email to:
>>PolySix-unsubscribe@yahoogroups.com
>>
>>PolySix "Digiest" Page: 
>><http://www.acc.umu.se/~amber/Poly6>http://www.acc.umu.se/~amber/Poly6
>>
>>Your use of Yahoo! Groups is subject to the 
>><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
>
>~GMM
>Analog Synthesizer Service
>http://home.earthlink.net/~klosmon/analogsynthservice/id1.html

[Non-text portions of this message have been removed]