Discussion about the Korg PolySix synthesizer

OK.   If the lights go on when you connect the resistor 
and off when you disconnect it, then no need to scope reset,
I guess.   Maybe start scoping some other signals to continue
your debug efforts.

    Bob


--------------------------------------------
On Mon, 2/15/16, jw_dewdney@yahoo.com [PolySix] <PolySix@yahoogroups.com> wrote:

 Subject: Re: [PolySix] Re: Power supply voltages
 To: PolySix@yahoogroups.com
 Date: Monday, February 15, 2016, 6:05 PM
 
 
  
 
 
 
   
 
 
     
       
       
       Hi Bob - I ASSUME it's working correctly (the
 reset) since the lights go off when I disconnect it. As
 previously mentioned I measure a 0.25v drop with the
 resistor in place across the +5v supply test point. As for
 the behaviour on the resetb pin- i will have to report to
 you later. Thanks!
 
     
      
 
     
     
 
 
 
 #yiv0777466308 #yiv0777466308 --