Discussion about the Korg PolySix synthesizer

Oops, there it is on page 10.

From: backshall1@bellsouth.net 
Sent: Monday, February 8, 2016 10:07 PM
To: PolySix@yahoogroups.com 
Subject: Re: [PolySix] Re: The Post I didn't want to make....

You are probably talking about the spreadsheet of available parts. If a part is no longer available at big parts places like Mouser, Digikey and Farnell, then it was left off the list a few years ago, although I see some of the unavailable parts have been added in as “Salvage”. I guess this is another one for Jed to add. Salvage the thermistor.
Don B.

From: mailto:PolySix@yahoogroups.com 
Sent: Monday, February 8, 2016 12:51 PM
To: PolySix@yahoogroups.com 
Subject: Re: [PolySix] Re: The Post I didn't want to make....

  
Hi Bob... actually i realized about five minutes after posting that was the thermistor, though i missed it because i was working rather slavishly from Jed's spreadsheet which didnt seem to have it on there.  


i DO have a scope actually. a lovely Tek 2445A. however I'm a bit intimidated about troubleshooting logic circuits and signals....ive only ever used it for analogue audio stuff really... so theres more to learn for me.

And i DID get some more functioning 5v test points on the board though still not TP1 which is zero... and TP2 is a bit low at 4.1v or thereabouts. I am a bit confused as the manual uses a totally different language like 'TP-J7' and i am not sure how they correspond to the board ...