Am 02.09.2015 um 17:48 schrieb Eoin O'Callaghan cliofreak@yahoo.com
[PolySix]:
noise signals are two different things. This ground line MUST be as wide
as at the other places. I really recommend to clean it with a fiber
glass brush, and then resolder it over the total length.
[PolySix]:
> That big thick ground trace is showing continuity. I think its fine. IShowing continuity and working satisfying as ground that can catchup
> could be wrong but its showing continuity from main ground right to
> ground on a chip at bottom of this board.
noise signals are two different things. This ground line MUST be as wide
as at the other places. I really recommend to clean it with a fiber
glass brush, and then resolder it over the total length.