There are two ways to control the MG modulation amount. The MG wheel adds
the LFO signal to the control voltage for the oscillator, so it varies the
pitch. The MG Level control can also send LFO signal to the oscillator or the
filter or the amplifier, depending on how the MOD switch is set. This signal can
be delayed using the MG Delay time knob. To remove all MG effects you will need
the MG wheel all the way down and the MG Level control off.
Yes, the Frequency is the speed of the LFO.
Don B.
Sent: Sunday, May 3, 2015 7:58 PM
Subject: [PolySix] Re: MG Frequency LED Always On?
In other words, if I turn the MG wheel all the way down, will this "shut off"
the LFO?
Does the Frequency knob control the "speed" of the modulation,
while the MG wheel controls "how much" modulation there is? Does that sound
right?