Discussion about the Korg PolySix synthesizer

use your oscilloscope to check if there is something on the data buses 
of the key assigner.. you should at least be able to see the key scanning..

Am 17.04.2015 um 13:40 schrieb mpe1969@tpg.com.au [PolySix]:
>
> I just checked the oscillator on the Klm366 cpu with oscilloscope. I 
> tested both sides of the crystal. I also tested the oscillator on the 
> klm367 board. The results looked the same for both boards (square wave 
> looking oscillations). So I assume  the oscillator is working is working.
>
> 

-- 
http://tubbutec.de
https://www.facebook.com/tubbu.tec