On the klm 367 board, there is a comparator output hooked into
The resistors driven by u35 outputs. I think this comparator
Will short the control voltage to gnd to mute the audio. So
Maybe this circuit is interfering with your volume control
Voltage.
The resistors driven by u35 outputs. I think this comparator
Will short the control voltage to gnd to mute the audio. So
Maybe this circuit is interfering with your volume control
Voltage.
From:
tuk88@rocketmail.com [PolySix] <PolySix@yahoogroups.com>;
To: <PolySix@yahoogroups.com>;
Subject: [PolySix] Re: Non-working attenuator
Sent: Wed, Dec 31, 2014 3:46:18 PM
To: <PolySix@yahoogroups.com>;
Subject: [PolySix] Re: Non-working attenuator
Sent: Wed, Dec 31, 2014 3:46:18 PM
Hey Bob,
I already change the capacitor on the base, but no change on the attenuator...
What are you talking about the reset circuit ?
Attachments
- No local attachments were found for this message.