Actually, the board that I bought came with 6 of the SSM2056 env gen chips
and 5 of the SSM2044 filter chips. I have tested the 2056's in my PolySix and
they are fine. I will test the SSM2044 chips maybe tonight or tomorrow. If
anyone needs one of these for replacement, or as a spare, please contact me.
They are not free, but will be less than recent ebay pricing.
Bob
From: "Bob Grieb bobgrieb@yahoo.com [PolySix]" <PolySix@yahoogroups.com>
To: "PolySix@yahoogroups.com" <PolySix@yahoogroups.com>
Sent: Friday, December 12, 2014 6:44 PM
Subject: Re: [PolySix] Trimpot available
To: "PolySix@yahoogroups.com" <PolySix@yahoogroups.com>
Sent: Friday, December 12, 2014 6:44 PM
Subject: Re: [PolySix] Trimpot available
I hope that's a good thing...
Or is it like "putz"? :-)
From: "Dave Garfield daveogarf@yahoo.com [PolySix]" <PolySix@yahoogroups.com>
To: "PolySix@yahoogroups.com" <PolySix@yahoogroups.com>
Sent: Friday, December 12, 2014 6:27 PM
Subject: Re: [PolySix] Trimpot available
To: "PolySix@yahoogroups.com" <PolySix@yahoogroups.com>
Sent: Friday, December 12, 2014 6:27 PM
Subject: Re: [PolySix] Trimpot available
It wasn't me, but you are a true mensch for that extremely generous offer, Bob!
Dave Garfield
On Friday, December 12, 2014 4:17 PM, "Bob Grieb bobgrieb@yahoo.com [PolySix]" <PolySix@yahoogroups.com> wrote:
I seem to recall someone on this list was looking for the small off-white trimpots
used on the KLM-366 board recently. If you are still interested, I
now have a whole board full of them and would be happy to mail you a few
for free.
Bob