In my ongoing P6 power supply saga, have got UK transformer hooked up ok but test points are reading
+5 = 3.6
+15 = 10.8
-15 = -10.7
Is this likely a problem with the transformer or more likely the voltage regulating components on the 376 board? Rectifiers shot?
Have tried adjusting trimpots but that does not make result in a noticeable voltage difference on the test points.
Have tested the two main Caps and they are within tolerance.
Any help or ideas appreciated.
Cheers
+5 = 3.6
+15 = 10.8
-15 = -10.7
Is this likely a problem with the transformer or more likely the voltage regulating components on the 376 board? Rectifiers shot?
Have tried adjusting trimpots but that does not make result in a noticeable voltage difference on the test points.
Have tested the two main Caps and they are within tolerance.
Any help or ideas appreciated.
Cheers