Discussion about the Korg PolySix synthesizer

Hi,

    The voltage at TP2, called Oct/V CV, which seems to be the input 
to the antilog ckt, is constantly switching between 8 values.   Six of them 
are the same when you go into unison mode, but there are still two other
ones being muxed in.    I guess for the factory calibration they must have had
a way to pause the muxing and put out specific DAC values for setting the 
trimmers using a DMM.  Seems like that code would be in the keyboard 
MCU, unless they had a factory test MCU that they used.

Bob
  




________________________________
 From: Malte Rogacki <gacki@gacki.sax.de>
To: PolySix@yahoogroups.com 
Sent: Friday, February 28, 2014 3:54 PM
Subject: RE: [PolySix] RE: Polysix tuning difficulties.
 


  
Does anyone have access to a complete (!) Trident Mk II service manual?
Posting the procedure for the antilog calibration would help tremendously.

I have the calibration routines for:

Trident (Mk I) -> incorrect and partly implausible
Poly-61 -> will have to check
MonoPoly -> will have to check

Can anyone think of other Korg Polysynths from that era that might use the
same antilog technique? I think this is the list:

Polysix
Poly-61
MonoPoly
Trident
Trident Mk II

It would seem odd to me that all of them have an antilog calibration
routine except the Polysix. The Polysix also has a test point at the same
circuit position...