Discussion about the Korg PolySix synthesizer

*very* useful, thanks!!

----- Original Message ----- 
From: "The Old Crow" <oldcrow@oldcrows.net>
To: <PolySix@yahoogroups.com>
Sent: Monday, September 01, 2003 8:33 AM
Subject: Re: [PolySix] I finally managed to make new a KLM-367


>
>   Here is my list:
>
>   1) IC24 on the schematic (below IC26 and to the left of RAM
IC32) is
> mislabled as IC34.
>
>   2) IC30 & IC31 have pin 4 listed twice.  The incorrect pin is
the one(s)
> tied to +5V.  The pins to +5V should read 1,5,10,13,14.
>
>   3) Pin 3 of IC27 (in the DAC section) should connect to GNDA
(not GND).
>
>   4) C33 (2uF2) positive lead goes to collector of Q5 (R98 is
mistakenly
> shown in the path).
>
> Crow
> /**/
>
> On Tue, 26 Aug 2003, David Davis wrote:
>
> > Would it be feasible to make a list of the errors in the
> > original Korg documentation, so that we could mark up the
> > corrections on it?
>
>
> ------------------------ Yahoo! Groups
Sponsor ---------------------~-->
> Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or
Lexmark
> Printer at Myinks.com. Free s/h on orders $50 or more to the US
& Canada. http://www.c1tracking.com/l.asp?cid=5511
> http://us.click.yahoo.com/l.m7sD/LIdGAA/qnsNAA/QnLolB/TM
> ---------------------------------------------------------------
------~->
>
> To unsubscribe from this group, send an email to:
> PolySix-unsubscribe@egroups.com
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>