Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Index last updated: 2026-03-31 18:47 UTC

Message

Re: [PolySix] I finally managed to make new a KLM-367

2003-09-01 by The Old Crow

Here is my list:

1) IC24 on the schematic (below IC26 and to the left of RAM IC32) is
mislabled as IC34.

2) IC30 & IC31 have pin 4 listed twice. The incorrect pin is the one(s)
tied to +5V. The pins to +5V should read 1,5,10,13,14.

3) Pin 3 of IC27 (in the DAC section) should connect to GNDA (not GND).

4) C33 (2uF2) positive lead goes to collector of Q5 (R98 is mistakenly
shown in the path).

Crow
/**/

On Tue, 26 Aug 2003, David Davis wrote:

> Would it be feasible to make a list of the errors in the
> original Korg documentation, so that we could mark up the
> corrections on it?

Attachments