Hi,
Assuming you have the battery leakage issue that all Polysixes seem to have
at some point, please check the connection feeding to the front panel 4051 analog mux chips.
A B C DATA INH1 and INH2. And if you have a scope, you should see the voltages
from the front panel potentiometers on the data line. Maybe the ADSR control voltages
from the front panel are not getting read properly?
Bob
From: "victoranalo32@yahoo.es" <victoranalo32@yahoo.es>
To: PolySix@yahoogroups.com
Sent: Tuesday, February 11, 2014 11:11 AM
Subject: [PolySix] Hello . :) problems my p6 , Speedpmw & release mode manual . Help .
To: PolySix@yahoogroups.com
Sent: Tuesday, February 11, 2014 11:11 AM
Subject: [PolySix] Hello . :) problems my p6 , Speedpmw & release mode manual . Help .
Hey guys, I found this site and I think fabulous,
first thank any aid,
I have a P6, I'm repairing but has 2 faults.
First ruling in manual mode (ADSR) always sounds like gate, I think the switch does not work and does not reach the order,
Second failure, I do not work the depth of pwm Speed.
Greetings to all and thanks.