Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Index last updated: 2026-04-28 23:40 UTC

Message

Re: [PolySix] Polysix mod kit: Polysex

2013-09-07 by Dennis Matana

Stunning mod dude! 
 

 
                            


________________________________
 From: Terje Winther <terje.winther@wintherstormer.no>
To: PolySix@yahoogroups.com 
Sent: Thursday, September 5, 2013 4:44 PM
Subject: Re: [PolySix] Polysix mod kit: Polysex
 


  
Hi,
Very interesting.
Can this be installed after the Polysix have been upgraded with the Kiwisix upgrade?

Terje



Den 5. sep.. 2013 kl. 09.41 skrev Tubbutec:

Hi,
>
>I would like to announce my Korg Polysix modification kit, the Tubbutec
>Polysex. http://tubbutec.de/polysex/
>
>It adds an additional control panel to the Polysix and increases its
>musical possibilities.
>
>There are two different mods which can both be used at the same time:
>
>The pitch mod routes the envelope to the pitch. You can choose the 
>polarity of the envelope and the reference point in the envelope where 
>the pitch is not changed. This mod is very useful to create portamento 
>like effects, brass instruments, percussive sounds and much more.
>
>The second mod is the voice spread mod which is a very powerful tool. 
>You can determine the amount of voice spread, route the envelope and one 
>of two LFOs to it and switch voice spreading on and off in poly mode. 
>This mod can be used to adjust and modulate the fatness of the sound in 
>unison mode, in poly mode you can modulate how detuned the Polysix 
>sounds. This can lead to more natural sounds, but can also be used to 
>accomplish complex sound effects.
>
>More information: http://tubbutec.de/polysex/
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>
>

Terje Winther
terje.winther@wintherstormer.no
http://wintherstormer.no/

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.