Discussion about the Korg PolySix synthesizer

It could still be the Q12 and a meter wouldn't pick up the fact that it 
is no longer tracking correctly. Also changing the TL072 (IC17) would be 
a good move.

MH

On 1/03/2013 1:37 p.m., rafeek.2010 wrote:
>
>
> hi ,
>
> transistor Q12 seems to be good (measure diode), the manual kiwisix is 
> full of extra information thx, but I still not have a good tune , all 
> seems good (ic 19, IC 31, P1501 ,Q12)if someone could give me 
> different point of voltage of VR's, like 1,2,3 ,15 would help me a lot 
> !!thanks
>
> --- In PolySix@yahoogroups.com <mailto:PolySix%40yahoogroups.com>, 
> Murray wrote:
> >
> > try changing Q12. Check page 24 of the Kiwisix Upgrade manual for
> > sources of these and other things to try.
> >
> > MH
> >
> >
> > On 28/02/2013 5:15 a.m., rafeek.2010 wrote:
> > >
> > > hello all,
> > >
> > > after several attempts to tune the KLM366 (tuning infos from this 
> Blog
> > > ) I decided to replaced the famous PC1 P1501 chip with a VTL5C3 and
> > > change R93 from 4k7 to 1k2 , but nothing change !! impossible to do
> > > tuning all of voices or 1 , I do my settings with a frequencymeter 
> and
> > > a software and i follow many procedure and this one also
> > > http://launch.groups.yahoo.com/group/PolySix/message/2154
> > >
> > > if you have a suggestion... many THX !!!
> > >
> > > Raf
> > >
> > >
> >
> > --
> > Kind Regards
>
> > Murray
>
> > murray@...
>
> > www.paintingwithsound.co.nz
>
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
> 

-- 
Kind Regards<br>
Murray<br>
murray@paintingwithsound.co.nz<br>
www.paintingwithsound.co.nz<br>



[Non-text portions of this message have been removed]