Discussion about the Korg PolySix synthesizer

hi ,

transistor Q12 seems to be good (measure diode), the manual kiwisix is full of extra information thx, but I still  not have a good tune , all seems good (ic 19, IC 31, P1501 ,Q12)if someone could give me  different point of voltage of VR's, like 1,2,3 ,15  would help me a lot !!thanks

--- In PolySix@yahoogroups.com, Murray <murray@...> wrote:
>
> try changing Q12. Check page 24 of the Kiwisix Upgrade manual for 
> sources of these and other things to try.
> 
> MH
> 
> 
> On 28/02/2013 5:15 a.m., rafeek.2010 wrote:
> >
> > hello all,
> >
> > after several attempts to tune the KLM366 (tuning infos from this Blog 
> > ) I decided to replaced the famous PC1 P1501 chip with a VTL5C3 and 
> > change R93 from 4k7 to 1k2 , but nothing change !! impossible to do 
> > tuning all of voices or 1 , I do my settings with a frequencymeter and 
> > a software and i follow many procedure and this one also
> > http://launch.groups.yahoo.com/group/PolySix/message/2154
> >
> > if you have a suggestion... many THX !!!
> >
> > Raf
> >
> > 
> 
> -- 
> Kind Regards<br>
> Murray<br>
> murray@...<br>
> www.paintingwithsound.co.nz<br>
> 
> 
> 
> [Non-text portions of this message have been removed]
>