At 13:43 Uhr +0000 08.10.2012, 7yash wrote:
points at IC31 as the most likely culprit.
Please check if the the following also are affected:
- VCA Mode
- VCA Attenuator
- VCO Waveform
The dead voice 5 is unrelated; we can debug this at a later point.
> What does not work:This has probably something to do with data lines D01 to D03 which in turn
>
> - All Bank LEDs as well as 1, 2, 3, 4 remain ON.
> - Found stays ON
> - LFO appears to always act upon the pitch
> - Voice 5 seems dead. A swap of both SSM chips on that segment did not
>change a thing
> - Sub-osc does not seem to work
> - Octave button does not seem to work
points at IC31 as the most likely culprit.
Please check if the the following also are affected:
- VCA Mode
- VCA Attenuator
- VCO Waveform
The dead voice 5 is unrelated; we can debug this at a later point.