Discussion about the Korg PolySix synthesizer

Great! Thanks Jed!  



________________________________
 From: Jed Jorgensen <jed.jorgensen@gmail.com>
To: PolySix@yahoogroups.com 
Sent: Wednesday, September 12, 2012 4:51 PM
Subject: Re: [PolySix] part sub
 
This should be fine:
http://www.mouser.com/ProductDetail/CTS-Electronic-Components/208-2/?qs=sGAEpiMZZMv%2f%252b2JhlA6ysHQcghgNQprp0bYq1FIZzvc%3d


You are just looking for a two position dip switch, standard 2.54mm pitch.
There are many that will work just fine, nothing special about the one
spec'd.

Jed

On Tue, Sep 11, 2012 at 11:09 PM, raisinbag69 <raisinbag69@yahoo.com> wrote:

> **
>
>
> I'm planning on building a new 367, one of Jed's boards as a replacement
> for my yukky one and grabbing all the parts I need ahead of time. Can
> anyone let me know if there is an appropriate sub for this (ideally mouser)
> ->
> http://www.digikey.ca/scripts/DKSearch/dksus.dll?Detail&itemSeq=119392666&uq=634830080725755440
>
> It is out of stock at Digi, and I don't use dip switches for my usual
> modular builds, so am not totally sure and don't want to buy the wrong
> thing that won't fit. I'm going off Jed's BOM so the build goes easy. I
> want my baby to work again, so using all the right parts. Cheers, Dave
>
>  
>


[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links



[Non-text portions of this message have been removed]