Sounds like maybe a loose cable (CN10) between the KLM-367 and the patch
buttons board.
Don B.
_____
From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
marcomir27
Sent: Saturday, August 11, 2012 3:29 PM
To: PolySix@yahoogroups.com
Subject: [PolySix] Restored Polysix acting out. Help !
Hello,
I need help with my Polysix. Here's the "symptoms":
1) All LEDs are staying on after power-up (tape is disabled); OR
2) Everything is fine, but after 2-3 minutes it automatically returns to
Patch 1, Bank 1.
Any idea ?
BTW, mine was recently restored with the KLM board clone. It worked well for
a couple months before these problems appeared.
Many thanks !
-Nicolas
[Non-text portions of this message have been removed]
buttons board.
Don B.
_____
From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
marcomir27
Sent: Saturday, August 11, 2012 3:29 PM
To: PolySix@yahoogroups.com
Subject: [PolySix] Restored Polysix acting out. Help !
Hello,
I need help with my Polysix. Here's the "symptoms":
1) All LEDs are staying on after power-up (tape is disabled); OR
2) Everything is fine, but after 2-3 minutes it automatically returns to
Patch 1, Bank 1.
Any idea ?
BTW, mine was recently restored with the KLM board clone. It worked well for
a couple months before these problems appeared.
Many thanks !
-Nicolas
[Non-text portions of this message have been removed]