Check the traces originating from CN06 on the KLM367 board.
BTW, the PW pot is probably just fine. If the waveform is set to PW (which
it might well be since the switch doesn't work) the sound will stop at
about 8 or so because at this point the pulse is getting too narrow.
Check also if the MOD switch for the LFO works.
BTW, the PW pot is probably just fine. If the waveform is set to PW (which
it might well be since the switch doesn't work) the sound will stop at
about 8 or so because at this point the pulse is getting too narrow.
Check also if the MOD switch for the LFO works.