At 22:12 Uhr +0000 08.02.2012, sigma.draconis wrote:
calibration). However if the keys also affect the frequency you may have
not set the KBD TRACK control to zero. This is important.
with VR8) is way off you may get a somewhat different result for the
amplitude. But as long as the frequencies are roughly in the ballpark you
shouldn't get too much of a difference.
I take it you noticed that the RESONANCE control needs to be set to "full"
for the VR8 calibration?
> And here is the point I don't get it.Hold it right there. It's normal that the voices differ (especially before
> When I measure with my scope on TP1, the signal differs from every voice and
> key.
calibration). However if the keys also affect the frequency you may have
not set the KBD TRACK control to zero. This is important.
> I can turn VR6, but I found out that when changing VR8, they interact withThere is some (slight) interaction. I believe when the frequency (as set
> eachother.
> So what is the starting situation?
with VR8) is way off you may get a somewhat different result for the
amplitude. But as long as the frequencies are roughly in the ballpark you
shouldn't get too much of a difference.
I take it you noticed that the RESONANCE control needs to be set to "full"
for the VR8 calibration?