Discussion about the Korg PolySix synthesizer

Also double check your transistor orientation. Some of the modern
replacements have different pinouts than the old ones, so if you used any
old ones they could be out of order. I know this issue has caught a couple
builders in the past.

Jed
On Sep 22, 2011 4:26 AM, "backshall1" <backshall1@bellsouth.net> wrote:
> The MG issue could be caused by forgetting to fix the two missing traces
on
> the clone board. Did you complete the two bug fixes mentioned on Jed's
site:
>
> https://sites.google.com/site/jedjorgensen/klm367a
>
>
>
> Don B.
>
>
>
> _____
>
> From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf
Of
> Malte Rogacki
> Sent: Thursday, September 22, 2011 6:06 AM
> To: PolySix@yahoogroups.com
> Subject: Re: [PolySix] Rebuilt 367 board issues
>
>
>
>
>
> Here's something that gives food for thought:
>
> At 2:01 Uhr +0000 22.09.2011, roboliot@sbcglobal.net
> <mailto:roboliot%40sbcglobal.net> wrote:
>> Here are some other things I noticed: The MG led is constantly
> illuminated,
>> and doesn't change when I adjust the rate. Pressing the Unison,
> arpeggiator,
>> poly buttons, do not appear to do anything at all.
>
> The latter means that there is some problem with the KLM366 board (or
> perhaps with the interconnects or the power supply). The key assigner and
> its control are NOT handled by the 367; they are completely independent.
>
> Does the Arpeggiator LED blink?
>
>
>
>
>
> [Non-text portions of this message have been removed]
>


[Non-text portions of this message have been removed]