Discussion about the Korg PolySix synthesizer

Hi there!

pin 1, 10 and 11 went high. also voltage on pin 1 of ic16 changed when i was turning speed knob.

--- In PolySix@yahoogroups.com, Andrew Jury <andy@...> wrote:
>
> Hi,
> 
> Check the output of IC34 at the following pins:
> 
> 10 - chorus
> 1 ­  phase
> 11 ­ ensemble
> 
> I believe these should go high went the effect is selected. If there seems
> to be a switching action at the these pins check to see if the voltage at
> IC16 pin 1 varies as you change the speed knob. Report back with your
> results!
> 
> Cheers,
> Andy
> 
> 
> 
> 
> On 02/01/2011 12:05, "radek" <radek.tymecki@...> wrote:
> 
> >  
> >  
> >  
> >    
> > 
> > I have another Polysix that had battery leak problem. I've managed to fix
> > broken traces etc.
> > 
> > The last thing which doesn't work are effects. When i switch it to
> > chorus/phaser there is no effect. speed knob doesn't react. when i switch
> > effect to ensemble i can hear it but intensity also is dead.
> > 
> > what can be the reason?
> > 
> >  
> >    
> > 
> > 
> 
> 
> 
> [Non-text portions of this message have been removed]
>