Hi Scott,
These are exactly the same as the first run. I did not correct the artwork
for a couple reasons:
1. Keeping costs down. There is a fair amount of setup cost for the
fabrication. Using the original artwork avoids new setup charges and allows
me to charge basically the same price.
2. The trace errors are few, relatively minor, well documented, and simple
to fix. My website documents the errors for any builders and shows you how
to fix them.
See this page:
https://sites.google.com/site/jedjorgensen/klm367a/images/pcb-bugs-errors
Thanks,
Jed
These are exactly the same as the first run. I did not correct the artwork
for a couple reasons:
1. Keeping costs down. There is a fair amount of setup cost for the
fabrication. Using the original artwork avoids new setup charges and allows
me to charge basically the same price.
2. The trace errors are few, relatively minor, well documented, and simple
to fix. My website documents the errors for any builders and shows you how
to fix them.
See this page:
https://sites.google.com/site/jedjorgensen/klm367a/images/pcb-bugs-errors
Thanks,
Jed
>[Non-text portions of this message have been removed]
> Hi Jed...
>
> Do these have any corrected artwork?
>
> I remember one trace missing when the PCB was first tried
>
>
>
>