Sixty! And here I thought I was getting to be an old pro at these after
dealing with eight.
Don B.
_____
From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
klosmon
Sent: Sunday, September 05, 2010 5:35 PM
To: PolySix@yahoogroups.com
Subject: Re: [PolySix] Re: Problem with new KLM-367A
On a battery-damaged reconditioned board, there are endless possibilities.
The synth was working when I repaired it (for whoever you purchased it
from) -- however, it's not uncommon for new problems to surface.
The easiest thing to do is send the board back to me, so I can see
what's what & what isn't.
Also, the serial number of the synth would be helpful, so I can check my
notes & find out when I worked on this & what was done (I've done about
sixty of these things, and I can't keep them in memory).
~GMM
analogsynthservice.com
[Non-text portions of this message have been removed]
dealing with eight.
Don B.
_____
From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
klosmon
Sent: Sunday, September 05, 2010 5:35 PM
To: PolySix@yahoogroups.com
Subject: Re: [PolySix] Re: Problem with new KLM-367A
On a battery-damaged reconditioned board, there are endless possibilities.
The synth was working when I repaired it (for whoever you purchased it
from) -- however, it's not uncommon for new problems to surface.
The easiest thing to do is send the board back to me, so I can see
what's what & what isn't.
Also, the serial number of the synth would be helpful, so I can check my
notes & find out when I worked on this & what was done (I've done about
sixty of these things, and I can't keep them in memory).
~GMM
analogsynthservice.com
[Non-text portions of this message have been removed]