Discussion about the Korg PolySix synthesizer

Andy,

yes both mods were done. Well mine is on all the time since connecting to the +5v rail (basicly on the left side of J3 on the 367-PS Board). I found trace solder were it was connected before. I will investigate further.

- Daniel

--- In PolySix@yahoogroups.com, Andrew Jury <andy@...> wrote:
>
> Hi Daniel,
> 
> Have you added the track mods around R52 and R98? The Group Buy site has the
> details (I think). Without the R52 mod the astable that drives the MG
> circuit won¹t oscillate. The R98 mod gets the MG delay working properly.
> Please check and let us know if you can¹t figure it out.
> 
> The MG LED pulse at the same frequency as the MG frequency knob is set to.
> It should always pulse on/off at some speed, it will never be always off,
> unless there is a problem!
> 
> Cheers,
> Andy