Jed,
I did not want to continue bugging you at work ;)
With the switch in the original direction no change in state takes place (LEDS A and Manual stay the same when toggling the tape switch). When test switch is thrown the LEDS will shift from A and Manual to 1 and 5. either direction on VR6 or 7 in adjusting does not change the state.
- Daniel
I did not want to continue bugging you at work ;)
With the switch in the original direction no change in state takes place (LEDS A and Manual stay the same when toggling the tape switch). When test switch is thrown the LEDS will shift from A and Manual to 1 and 5. either direction on VR6 or 7 in adjusting does not change the state.
- Daniel
--- In PolySix@yahoogroups.com, Jed Jorgensen <jed.jorgensen@...> wrote:
>
> Hmmm.
>
> This is going to sound dumb, but have you tried setting the test switch the
> other direction?
>
> I recall the dip switches seemed 'backwards' to me...
>
>
>