Discussion about the Korg PolySix synthesizer

Don't forget Write Enable has to be turned on as well as Tape Enable to get the From Tape to light up.


--- In PolySix@yahoogroups.com, Andrew Jury <andy@...> wrote:
>
> Nate,
> 
> Wouldn¹t it have been better to write to me directly? The board was working
> before it left the lab and tested to within an inch of its life. Drop me a
> line some time and I should be able to help you.
> 
> Cheers,
> Andy
> 
> 
> On 27/07/2010 12:59, "n8" <nmr2@...> wrote:
> 
> >  
> >  
> >  
> >    
> > 
> > hello list.  got my board in the post yesterday and have put her in!  looks
> > great btw!
> > 
> > however, i have had a few issues along the way.  when trying to load the
> > patches i cannot get the "from tape" button to light up when pressed in tape
> > dump enable mode.
> > 
> > also, my arp and key assign mode sections do not respond.  =(
> > 
> > all leds light up when i put on the 56k resistor and i checked the d/a
> > adjustment looks good on both
> > 
> > anyone having any issues with their new klms?  not sure how to proceed...
> > 
> > seems like my old klm worked better but not the digital logic stuff for all
> > the buttons on the programmer/bank section...
> > 
> > i get no noise out the unit now =(
> > 
> > any suggestions?  i dont have a oscope so havent done any other adjustments
> > other than the ones above.
> > 
> > cheers!
> > 
> > nate
> > 
> >  
> >    
> > 
> > 
> 
> 
> 
> [Non-text portions of this message have been removed]
>