Discussion about the Korg PolySix synthesizer

That sounds almost exactly like the problem I am having. Programs A6, A7,
C6, C7 are not storing some parameters, usually the MG settings but
sometimes the VCF cutoff and EG attack are way off also. I have been
assuming the memory chip is no good but with the symptoms changing a bit on
some days, I want to find time for more testing before I order a new chip.
Some days A5 and A8 also seem to have problems.
 
Don B.

  _____  

From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
petrolio77
Sent: Sunday, March 14, 2010 2:16 PM
To: PolySix@yahoogroups.com
Subject: [PolySix] P6- all programs don't save EG and VCF levels (not
properly)


  


Hallo to all again ! 
I was messing with the D/A converter ,now is ok
--thanks to your help---

Now the problem is still the one that brought me to start the 
adjustment procedure.
VCF and EG levels are not correctly stored in the programs for all
the banks.

Another question :during the klm366 VCF resonance adjustment
the manual say to check cn05-7 and adjust it to 0V
where is the trimmer?

thanks 
Petrolio






[Non-text portions of this message have been removed]